The xTool P2S CO2 laser, Samcraft's guide.

xTool P2S CO2 Laser: What Changed From the P2

I don't own an xTool P2S, so everything below about the P2S itself comes from xTool's own published pages. My hands-on experience is with the P2, which xTool lists with the same laser, work area and body, and I'll say when that's what I'm drawing on. The xTool links here are affiliate links, and xTool has never had a say in what I write. I also sell test files for this machine, and I'll point them out when they come up.

The xTool P2S is the update to the P2 I've run since 2023. On xTool's own spec sheet, the two machines line up almost row for row: same 55W CO2, same 600 x 305 mm working area, same dual 16MP cameras, same 45 kg body. So the question isn't what the P2S is. It's what changed, and whether those changes fix the things I actually deal with on my P2.

The short version

The P2 with faster engraving, better airflow and easier optics cleaning. Same size, same laser.

Where it shines

Dual-camera placement, one-pass cuts in 18 mm wood and 20 mm acrylic, 118 inch passthrough, and double the X-axis acceleration of the P2.

Know going in

It's still 64 mm tall with the tray, it's a glass tube that fades with hours, and LightBurn works without the camera or autofocus.

Best for

Small shops cutting and engraving wood, acrylic and leather who want camera placement in a desktop CO2.

The xTool P2S at a glance

These are xTool's published numbers from the P2S product page. At the time I'm writing this, xTool lists the P2S as a pre-order.

Specs
Laser 55W CO2, glass tube rated 6,000 to 8,000 hours
Working area 600 x 305 mm (23.6 x 12 in)
Passthrough AutoPassthrough, material up to 118 in long
Max processing height 64 mm with tray, 71 mm without, 215 mm with the riser base
Max speed 600 mm/s, X-axis acceleration 6,400 mm/s²
Cutting 18 mm basswood and 20 mm acrylic, one pass
Cameras 16MP close-range + 16MP panoramic
Focus Autofocus with LiDAR ranging
Positioning precision 0.3 mm (camera). Motion accuracy 0.015 mm
Laser spot size 0.15 x 0.2 mm
Rotary 3 to 42 mm diameter on the baseplate, 0 to 180 mm with the riser base
Safety Class 4, enclosed, AI fire detection
Footprint and weight 1000 x 639 x 268 mm, 45 kg
Power 700W max input
Software xTool Studio (Windows and macOS). LightBurn works, without camera or autofocus

What changed from the P2

xTool's own P2S vs P2 spec table is nearly identical. The differences are in the details, and xTool calls them out as upgrades based on user feedback.

P2 to P2S, per xTool Faster engraving X-axis acceleration 3,200 to 6,400 mm/s². xTool says 40% faster engraving. Better airflow Stronger exhaust fan and air pump for a cleaner workspace. Easier maintenance An optical path solution and routine cleaning changes. New software features 3D cylinder engraving and Batch Processing 2.0, in xTool Studio. Unchanged: 55W CO2, 600 x 305 mm, dual 16MP cameras, 64 mm height with tray, 45 kg

Why the maintenance changes caught my eye

On my P2, I clean the lens and mirrors every day, and it takes about five minutes once you've done it a couple of times. It's a little lengthy compared to some machines I've had. xTool says the P2S reworked the optical path and the routine cleaning. I haven't used a P2S, so I can't tell you how much easier it is.

Airflow

The P2's built-in fan isn't enough by itself. I run a 6 inch inline duct fan with blast gates to pull the air out of the building. A stronger fan and air pump in the P2S is good news, and I'd still plan on an inline fan venting outside.

Faster engraving

Top speed is still 600 mm/s. What doubled is how fast the X axis gets up to speed, and on engraving jobs that's where time goes: the head speeds up and slows down on every line. xTool puts the savings at 40% on engraving time.

What stays the same, and what that means

The cameras

Same dual 16MP setup as my P2, a panoramic camera for the whole bed and a close-range camera that rides with the head. On my P2 that close view is the one I trust for alignment, and it's what lets me pull a piece out, put it back and fix a mistake without anyone being able to tell. xTool also lists 3-second auto-scan and Batch Fill for placing designs on a bed full of items.

The work area and height

600 x 305 mm inside the machine, with passthrough for material up to 118 inches long. Height is the one that catches people: 64 mm with the tray in. Tumblers on the rotary and anything tall need the riser base, which takes you to 215 mm.

Drawn to scale Working area 600 x 305 mm Max height With tray 64 mm No tray 71 mm Riser 215 mm Passthrough Up to 118 in long A 4 x 8 ft sheet won't go in whole. Long boards and signs feed through the passthrough.

It's a glass tube

xTool is upfront about this on its FAQ: the P2S uses a glass CO2 tube rated for 6,000 to 8,000 hours. Output drops to about 95% at 1,000 hours and to about 70% by the end of that life. That's normal for glass tubes, and it's worth knowing so you're not surprised when a cut setting that worked last year needs a little more power.

Software

xTool lists xTool Studio for the P2S. Its FAQ says you can run it from LightBurn, but the camera and autofocus don't work there, so you frame to preview and type in material thickness yourself. For what it's worth, xTool lists LightBurn as supported on the P2 too, and I never got mine working with it. I run my P2 in xTool's software.

What I'd add on day one

This comes straight from my P2, and it applies the same way to the P2S.

  1. An inline duct fan vented outside, with a blast gate.
  2. A cleaning kit: gloves, 70% isopropyl, foam swabs, a microfiber cloth.
  3. Machinist 1-2-3 blocks for squaring your work against the front of the machine.
  4. Digital calipers for material thickness and test squares.
  5. CO2 laser safety glasses rated for 10,600 nm.
  6. A test routine. Dial in your own settings instead of trusting the defaults. And cut a test square and measure the diagonals when the machine arrives. On my P2 the diagonals were once over a millimeter apart, even though the sides measured fine.
From the Samcraft shop
Samcraft complete engraving and cutting test file kit for xTool software.
Complete Test File Kit for xTool Software

Engraving tests across three speed ranges plus cutting tests, laid out so you can run them once, find your power and speed, and stop guessing.

Digital download. A LightBurn version is available too.

See the Test File Kit

Checking a new machine for square? My 100 mm square grid test file is a free download.

Should you buy one?

Buy it if

  • You cut and engrave wood, acrylic, leather and slate
  • You want camera placement that lets you rerun and fix jobs
  • You work with long boards and signs that need passthrough
  • You want the current version of the P2 with a full warranty

Think twice if

  • You need to mark bare metal. A CO2 needs coated or treated metal.
  • You regularly work on items taller than 64 mm and don't want the riser
  • You don't have a way to vent a laser outside
  • You want a bigger bed or more power. Look at the P3.

Running a P2 already? Here's my xTool P2 guide. Want to see the whole lineup side by side? Read xTool CO2 lasers compared.

See the P2S at xTool (affiliate link)

Common questions

What's the difference between the xTool P2 and P2S?

Per xTool, the P2S doubles X-axis acceleration (6,400 vs 3,200 mm/s²), which xTool says speeds up engraving by 40%, and adds a stronger exhaust fan and air pump, an optical path solution for easier cleaning, 3D cylinder engraving and Batch Processing 2.0. The laser, work area, cameras and size are the same.

How big is the xTool P2S work area?

600 x 305 mm, with passthrough for material up to 118 inches long. Max height is 64 mm with the tray, 71 mm without it, and 215 mm with the riser base.

How thick can the P2S cut?

xTool rates it for 18 mm basswood and 20 mm acrylic in one pass. xTool's FAQ advises against cutting plywood thicker than 12 mm.

Does the xTool P2S work with LightBurn?

Per xTool's FAQ, yes, but the camera and autofocus don't work in LightBurn. You frame to preview and enter material thickness yourself. xTool Studio is xTool's own software for it.

How long does the P2S laser tube last?

xTool rates the glass tube at 6,000 to 8,000 hours. It says output drops to about 95% at 1,000 hours and to about 70% by the end of that range.

Can the P2S engrave metal?

Coated metal, anodized aluminum and anodized titanium, yes. Per xTool, bare stainless needs a marking spray first. It can't cut metal or glass.

Have you tested the P2S yourself?

No, I don't own one. The details in this post come from xTool's published pages. My hands-on experience is with the P2, which shares the P2S's laser, work area and cameras.

More from the Maker Guides

xTool P2: what I've learned since 2023

xTool P3: the 80W flagship

xTool CO2 lasers compared

See my laser files

Watch my P2 videos on Samcraft on YouTube, including fixing mistakes with the P2 cameras and lens and mirror cleaning.

Sam

Disclosure: I don't own an xTool P2S, and no hands-on testing of it is reflected in this post. xTool requested one of the P2 videos I draw on here. xTool links in this post are affiliate links that may earn Samcraft a commission at no extra cost to you. xTool has no editorial input or control over Samcraft content. Samcraft sells its own test files for this machine. Specifications are from xTool's P2S product page. Last reviewed September 2026.

Back to blog