Made to order in Tennessee

ComMarker Jigs & Accessories

Load a batch, engrave it, swap and go again. Jigs that drop into my tool-free Jig Baseplate, plus a Fence Kit, a Drinkware Jig and a low profile fume extractor, all made for the M5 threaded table on the ComMarker B4 that's been in my shop since 2023.

  • Jigs 3D printed to order in Tennessee
  • Ships in about 4 business days
  • Free US shipping over $75
  • Matching SVG with every jig
Pen Jig - ComMarkerBusiness Card & ID Badge Jig (CR80) for ComMarkerDrinkware Jig - ComMarkerMetal Coin Jig - 40mm - ComMarker

Why it works

A galvo is fast. A jig keeps it fed.

A galvo finishes small jobs in seconds, so the slow part is lining up the next blank. A jig puts every item in the same spot, so you set the job up once and run it batch after batch.

Swap jigs without tools

Bolt the Jig Baseplate to the threaded table once. After that, jigs drop in and lift out in seconds, and each one lands in the same spot.

Same spot every time

Each pocket is shaped to the item, so every blank lands where your file expects it. Pens, cards, tags and coins by the batch.

Art that lines up

Every flat-item jig comes with a matching SVG, so your layout lines up with every pocket in LightBurn or your laser software.

Start here

The ComMarker essentials

The four things ComMarker owners pick up most.

Jig color:Sets the color for every Add button on this page.
1

Jig Baseplate for ComMarker Lasers

A cradle and four clamping arms bolt to the M5 threaded table once. After that, any Samcraft ComMarker jig drops in and lifts out with no tools.

2

Drinkware Jig - ComMarker

One kit for 1 oz shot glasses up to 30 oz stepped tumblers, mason jar mugs and wine glasses. Three ramps level the face you're engraving.

3

4" Fume Extractor - Low Profile - ComMarker

A low profile nozzle bolts to the threaded base right next to the work, with a 4 inch port for flex hose or rigid pipe.

4

Fence Kit - ComMarker

14 fence sections and 10 stainless M5 bolts, so odd-shaped items land in the same spot run after run.

Shop by item

Find your ComMarker jig

Every jig comes with a matching SVG and drops into the Jig Baseplate. Check the item size on each listing before you order.

Jig color:Sets the color for every Add button on this page.

Pen, pencil and flashlight jigs for ComMarker

3 jigs · from $12.50

Business card, wallet and bookmark jigs for ComMarker

7 jigs · from $12.50

Tag and keychain jigs for ComMarker

8 jigs · from $12.50

Coin, block and game jigs for ComMarker

4 jigs · from $12.50

Golf and sports ball jigs for ComMarker

3 jigs · from $12.50

Coaster jigs for ComMarker

2 jigs · from $12.50

Patch jigs for ComMarker

5 jigs · from $12.50

Bottle opener, lighter and flask jigs for ComMarker

6 jigs · from $12.50

Don't see your item? Tell me about it and I'll design a jig for it.

Request a custom jig

Size and setup

Will it fit my ComMarker?

Every ComMarker jig I make is 109 x 109 mm, sized for the 110 x 110 mm lens I use for 99% of jobs on my B4. The Jig Baseplate and my accessories bolt to the M5 threaded table.

200 mm lens 4 inch coaster in a 109 mm jig 110 x 110 mm lens

Drawn to scale. Orange: the 110 mm field the jigs are made for. Dashed: the B4's 200 mm lens.

Jigs are 109 x 109 mm

Made for a 110 x 110 mm field, the lens I use for 99% of jobs on my B4 and the area I count on with my Omni 1. The engraving area inside each jig is slightly smaller, so check your own work area before you order.

Made for the M5 threaded table

The Jig Baseplate, Fence Kit, Drinkware Jig and fume extractor all bolt down with the stainless M5 bolts in each kit. The jigs need no hardware once the Baseplate is on.

No Baseplate yet?

The jigs work on their own, but you need your own way to center and hold each one under the lens. The Jig Baseplate does that for you.

Fumes and drinkware

The B4 has no fume extraction in the box. My low profile extractor bolts to the base and takes a 4 inch hose. For a logo on a cup, the Drinkware Jig levels the face, so you don't need a rotary.

Jig mounting

On its own

Center the jig under the lens and hold it in place your own way.

Great for: a one-off run.

Watch out: every swap means lining it up again.

Jig mounting

With the Jig Baseplate

A cradle and four clamping arms bolt to the table once. After that, jigs drop in and lift out with no tools.

Great for: shops that switch items through the day.

Price: from $35.00.

How it compares

Which setup is best for your ComMarker?

There are three ways to hold items on a ComMarker. I only make the best one: turn key jigs built for shops that engrave for a living.

OK

Free jig files you print yourself

For tinkerers with a 3D printer and time to test.

  • ✕Art that lines upYou build and line up your own layout.
  • ~A pocket made for each itemFit varies from file to file.
  • ✕Same spot every swapOnly if you line it up by hand.
  • ~Built for production batchesFine for a hobby run.
Good

Adjustable universal jigs

For one-offs and odd shapes that change every job.

  • ✕Art that lines upYou place and line up your art for each setup.
  • ~A pocket made for each itemArms or pegs hold whatever fits between them.
  • ~Same spot every swapOnly if you set it the same way each time.
  • ~Built for production batchesYou reset it when the item changes.
Turn key · made for business
Best

Samcraft jigs + Jig Baseplate

For shops that engrave the same item by the batch.

  • ✓Art that lines upA matching SVG comes with every flat-item jig.
  • ✓A pocket made for each itemShaped to the item, so every blank sits snug.
  • ✓Same spot every swapDrops into the Baseplate with no tools, in the same place every time.
  • ✓Built for production batchesLoad a full jig, like 5 pens, and run it again and again.

The full lineup

All ComMarker products

Watch it work

Straight from my shop

From the Samcraft YouTube channel.

When to Get a Fiber Laser: ComMarker B4 20W

My B4 after two years: what it does well and where it fights you.

One Laser that Engraves Anything? ComMarker Omni 1

UV on metal, wood, glass and plastic with no heat damage.

Laser Engraving Drinkware? Then You Need This!

Tumblers, mugs and glasses in my Drinkware Jig.

Asked and answered

ComMarker jig questions

Which ComMarker lasers do your jigs fit?

I design them for the M5 threaded table on my ComMarker B4 fiber and Omni 1 UV. Each jig is 109 x 109 mm, so your lens needs a work area of at least 110 x 110 mm. Have a different model, like a B6 or an Omni X? Email me the model before you order and I'll check it.

Do I need the Jig Baseplate?

It's not required, but I highly recommend it. Without it, you need your own way to center and hold each jig under the lens. With the Jig Baseplate (from $35.00), jigs drop in and lift out with no tools, in the same spot every time.

Do I need screws or tools?

Only once. The Baseplate's cradle and four clamping arms bolt to the threaded table with the stainless M5 bolts in the kit. After that, the jigs nest into it with no hardware.

What comes with each jig?

The jig and a matching SVG file you can open in LightBurn or your laser software, so your art lines up with every pocket. Blanks are not included, and each listing shows the item sizes it fits.

What are your jigs made of?

Every jig is 3D printed in plastic, to order, in my Tennessee shop. Keep the laser off the jig itself, because plastic can melt if the beam hits it or the item gets too hot.

What colors do they come in?

Blue, Green, Black and Gray. Pick a color with the color buttons on this page, and every Add button uses it, or choose on each listing.

Will the Fence Kit, Drinkware Jig and fume extractor fit my machine?

They're made for the ComMarker threaded base and bolt down with the stainless M5 bolts in each kit. The fume extractor also fits other galvo lasers with an M5 threaded base on a 25 mm grid.

Do I need a rotary for tumblers?

Not for a logo on one face. Lay the cup on its side in the Drinkware Jig, level the face you're engraving with the ramps, and the galvo handles it. For a full wrap, you need a rotary.

How fast do orders ship?

Everything is made to order and is usually on its way in about four business days. US orders over $75 ship free, and I also ship to 21 other countries with duties and taxes paid at checkout.

What if I do not see a jig for my item?

Send me the details on my custom jigs page. Custom jigs start at $49.99 and take about four weeks, and I test the fit in my shop before it ships.

Samcraft

I'm Sam, and Samcraft is my small family business in Tennessee. My ComMarker B4 fiber has been in my shop since 2023 and my Omni 1 UV since late 2024. Questions before you order? Email support@samcraft.shop and it comes straight to me.

Got another machine? See my xTool F1 / F2 jigs, F1 Ultra jigs or shop by machine. Read what customers say on my reviews page.

Sam | Samcraft · Updated November 2026