The xTool P2S and Bambu Lab R1 CO2 lasers, Samcraft's comparison guide.

xTool P2S vs Bambu Lab R1: 55W Desktop CO2 Lasers Compared

I don't own an xTool P2S or a Bambu Lab R1. Every spec below comes from xTool's and Bambu Lab's own published pages. My hands-on experience is with the xTool P2, which xTool lists with the same laser, work area and body as the P2S, and I run a fleet of Bambu Lab 3D printers. The xTool links here are affiliate links. I have no relationship with Bambu Lab.

These two are the obvious cross-shop in desktop CO2 right now: 55W each, about the same working area, cameras on both, and both built by companies that care a lot about automation. By the specs, they're closer than most comparisons I write. The differences are in height, footprint, what's included and how each one handles setup.

The short version

Same laser power, same working area. The R1 is smaller and more automated. The P2S has a longer track record.

xTool P2S

Built on the P2 platform I've used since 2023. 118 inch passthrough, LightBurn listed as an option, and a lineup of accessories that's been around a while.

Bambu Lab R1

A lighter, lower body, Class 1 standalone, automatic laser alignment, and faster top speed. Brand new, and a lot of accessories are sold separately.

Side by side

These are each company's published numbers from their own product, spec and FAQ pages.

xTool P2S Bambu Lab R1
Laser 55W CO2 (glass tube, 6,000 to 8,000 hr) 55W CO2
Working area 600 x 305 mm 600 x 300 mm
Long material Passthrough up to 118 in (about 3,000 mm) 600 x 3000 mm with the conveyor (sold separately)
Max height 64 mm with tray, 215 mm with riser 58 mm, 248 mm with riser
Max speed 600 mm/s 1,000 mm/s
Acceleration 6,400 mm/s² (X axis) 20,000 mm/s²
One-pass cut 18 mm basswood, 20 mm acrylic 15 mm black walnut plywood (18 mm with medium or long lens), 20 mm acrylic
Spot size 0.15 x 0.2 mm 0.11 mm (standard short-focus lens)
Positioning Dual 16MP cameras, 0.3 mm Dual camera, dual laser, dual encoder, under 0.2 mm
Laser alignment No automatic alignment listed Automatic, with a toolhead sensor
Safety class Class 4 Class 1 standalone, Class 4 with riser or conveyor
Size and weight 1000 x 639 x 268 mm, 45 kg 940 x 560 x 200 mm, 33.5 kg
Software xTool Studio. LightBurn without camera or autofocus Bambu Suite

Cutting numbers aren't apples to apples: xTool rates basswood, Bambu rates black walnut plywood.

Where the R1 pulls ahead

Automatic laser alignment

This is the one I'd weigh most. On a CO2, the mirrors that carry the beam to the head have to stay lined up, and on my P2 that's a hands-on job. When I squared up my P2's gantry, I had to realign the mirrors afterward. Bambu says the R1 does its own alignment with a sensor on the toolhead. If it works in a real shop the way Bambu describes it, it's a real time saver.

Size, weight and speed

For about the same working area, the R1 is 11.5 kg lighter and 68 mm lower. Bambu publishes a 1,000 mm/s top speed and 20,000 mm/s² acceleration against the P2S's 600 mm/s and 6,400 mm/s² on the X axis. On engraving jobs, acceleration is where time goes.

Class 1 standalone

Out of the box, the R1 is a fully enclosed Class 1 machine. The P2S is Class 4. Once you add the R1's riser or conveyor, Bambu says it becomes Class 4 too, so the difference only holds for flat work.

Where the P2S pulls ahead

It's built on a platform with a track record

The P2S is xTool's update to the P2, and I've run a P2 since 2023. The cameras, bed, passthrough and body are the same design. The R1 is Bambu's first laser. Bambu builds the printers I run in my shop, but a brand new machine hasn't had the years in the field that the P2 platform has.

Long material without an add-on

The P2S's AutoPassthrough handles material up to 118 inches long. The R1 reaches a similar 3,000 mm, but only with its conveyor, which is sold separately and needs the riser base.

A little more height standalone, and LightBurn

64 mm with the tray on the P2S vs 58 mm on the R1. Both need a riser for tall items. xTool also lists LightBurn for the P2S, without the camera or autofocus. Bambu lists its own Bambu Suite for the R1.

What's included vs sold separately

Per Bambu, the R1's riser base, rotary, conveyor, medium and long focus lenses, Vision Encoder (for its under 0.1 mm motion accuracy spec) and auto fire extinguishing system are all sold separately. On the P2S, xTool also sells the riser base, rotary and fire safety set separately, but passthrough is built in. Price out the setup you'll actually run, not the base machine.

Which one I'd point you to

Lean P2S if

  • You want a platform with years of real-world use behind it
  • You work with long boards and don't want to add a conveyor
  • You want LightBurn as a backup option
  • You're already using xTool machines or software

Lean R1 if

  • Automatic laser alignment matters to you
  • You're short on space or moving the machine around
  • Most of your work is flat and you want Class 1
  • You already run Bambu printers and use MakerWorld

See the P2S at xToolSee the R1 at Bambu Lab (xTool link is an affiliate link)

Common questions

Is the Bambu Lab R1 better than the xTool P2S?

By the specs, the R1 is smaller, lighter and faster, with automatic laser alignment and Class 1 safety standalone. The P2S has built-in passthrough, a bit more standalone height, LightBurn listed as an option, and it's built on the P2 platform that's been in shops for years. Which is better depends on your work.

Do the P2S and R1 have the same working area?

Nearly. The P2S is 600 x 305 mm and the R1 is 600 x 300 mm. Both handle long material, the P2S through built-in passthrough up to 118 inches and the R1 through an optional conveyor up to 3,000 mm.

Which is taller inside, the P2S or R1?

Without a riser, the P2S is 64 mm with the tray and the R1 is 58 mm. With their riser bases, the P2S goes to 215 mm and the R1 to 248 mm.

Which one is Class 1?

The R1 is Class 1 standalone and becomes Class 4 with the riser or conveyor, per Bambu. xTool rates the P2S Class 4.

Can either one engrave bare metal?

No. Both are CO2 lasers and mark coated or treated metal. For bare metal you need a fiber laser.

Have you used either machine?

I don't own either one. I've run the xTool P2, which shares the P2S's laser, work area and body, since 2023, and I run Bambu Lab 3D printers.

More from the Maker Guides

xTool P2S: what changed from the P2

Bambu Lab R1: what Bambu built

xTool CO2 lasers compared

Bambu Lab R1 vs Glowforge

See my laser files

Sam

Disclosure: I don't own an xTool P2S or a Bambu Lab R1, and no hands-on testing of either is reflected in this post. I own an xTool P2. xTool links in this post are affiliate links that may earn Samcraft a commission at no extra cost to you. Samcraft has no relationship with Bambu Lab. Neither company has editorial input or control over Samcraft content. Specifications are from xTool's P2S product page and Bambu Lab's R1 specs, overview and FAQ pages. Last reviewed September 2026.

Back to blog