The Bambu Lab R1 CO2 laser, Samcraft's guide.

Bambu Lab R1 CO2 Laser: Specs and Features

I don't own a Bambu Lab R1, so everything below about the R1 itself comes from Bambu Lab's own published pages. Where I bring in my own experience, it's from the two CO2 lasers I run, an xTool P2 and a Thunder Nova 35, and from the Bambu Lab 3D printers I make my jigs on. I have no relationship with Bambu Lab, and there are no affiliate links in this post.

The Bambu Lab R1 is Bambu's first CO2 laser: 55W, a 600 x 300 mm working area, and a lot of automation borrowed from how Bambu builds its printers. I 3D print my jigs on a fleet of Bambu Lab printers, so I know how that company approaches setup and software. This post walks through Bambu's numbers and what they'd mean in a small shop.

The short version

A compact 55W CO2 with a lot of automation built in. Short without the riser.

Where it shines

Automatic laser alignment, camera and encoder positioning under 0.2 mm, 1,000 mm/s, a Class 1 enclosure, and a 200 mm tall body.

Know going in

58 mm of height standalone. The riser, rotary, conveyor, thicker-cut lenses, Vision Encoder and fire extinguishing system are all sold separately.

Best for

Makers cutting and engraving wood, acrylic and leather who want a compact CO2, and anyone already in the Bambu ecosystem.

The Bambu Lab R1 at a glance

These are Bambu Lab's published numbers from the R1 specs and FAQ pages.

Specs
Laser 55W CO2
Working area 600 x 300 mm, 600 x 3000 mm with the conveyor
Max material size 710 x 380 mm standalone, up to 610 mm wide with the conveyor
Processing height 0 to 58 mm standalone, up to 248 mm with the riser base
Max speed 1,000 mm/s, acceleration 20,000 mm/s²
Cutting (plywood) Short-focus lens: 15 mm black walnut, 20 mm acrylic. Medium or long lens: 18 mm black walnut, 20 mm acrylic
Spot size Short 0.11 mm, medium 0.17 mm, long 0.19 mm. Short-focus lens is standard
Positioning Dual camera, dual laser and dual encoder system, under 0.2 mm
Motion accuracy Under 0.1 mm over 600 mm, with the Vision Encoder (sold separately)
Automation Automatic laser alignment, autofocus, one-tap setup, material recognition on Bambu materials
Air assist 30 L/min at 30 kPa
Safety Class 1 standalone (Class 4 with the riser or conveyor). Lid-open protection, flame detection, safety key, emergency stop
Footprint and weight 940 x 560 x 200 mm, 33.5 kg
Software Bambu Suite (Windows and macOS), dual-band Wi-Fi and USB

What stands out

Automatic laser alignment

On a CO2, the beam travels from the tube to the head off a set of mirrors, and those mirrors have to line up. On my P2 I clean the optics every day, and when I squared up its gantry I had to realign the mirrors afterward. Bambu says the R1 aligns its own optical path with a sensor you mount on the toolhead. It recommends calibrating on first use, after a move or a bump, after changing the tube or lenses, when results drop off, and monthly for upkeep. If it works as described, that's one of the most tedious CO2 chores made quick.

Positioning from three directions

Bambu calls it TriSense: a panoramic camera, a toolhead camera, a pinpoint laser and a distance laser, and encoders on the X and Y axes. It publishes positioning under 0.2 mm. Camera placement is how I work on my P2 every day, so this is the part I'd want to see in person. The toolhead camera can also trace a printed or drawn outline and cut along it.

It's compact for the area

940 x 560 x 200 mm and 33.5 kg for a 600 x 300 mm working area. Bambu says that's about a third less space than a typical CO2 with the same area. My P2 has a similar 600 x 305 mm working area in a 1000 x 639 x 268 mm, 45 kg body.

It fits the Bambu ecosystem

Same Bambu account, same MakerWorld, and Bambu Suite for software. If you already run Bambu printers like I do, the setup and app should feel familiar. The R1 also works with Bambu's E1 Pro purifier, which links to the machine.

What to plan for

Height without the riser

Standalone, the R1 handles 0 to 58 mm. That covers sheet goods, coasters and signs. Anything taller, including anything on the rotary, needs the riser base, which Bambu says is also required for the conveyor and the rotary. With the riser, you get up to 248 mm.

Drawn to scale Working area 600 x 300 mm Max material 710 x 380 mm Height Standalone 58 mm With riser 248 mm Conveyor 600 x 3000 mm working area The riser base is required for the conveyor and the rotary, and changes the R1 to Class 4.

The Class 1 rating depends on the setup

Standalone, the R1 is a fully enclosed Class 1 machine. Bambu is clear that with the riser base or the conveyor, the enclosure isn't complete anymore and it becomes a Class 4 device that needs CO2 laser safety glasses. Since tall items and the rotary need the riser, plan on glasses either way.

What's sold separately

Per Bambu, the riser base, rotary, conveyor, medium and long focus lenses, Vision Encoder, auto fire extinguishing system and E1 Pro purifier are all sold separately. The short-focus lens is standard. It has the smallest spot, 0.11 mm, and a 15 mm black walnut plywood cut rating. The 18 mm rating needs the medium or long lens.

No bare metal

Like any CO2, the R1 marks coated metal, glass and ceramic, but Bambu says bare metal can't be engraved and warns against reflective, uncoated metals. For bare metal, you're looking at a fiber laser.

Ventilation

Bambu's pages call out keeping the exhaust clear and the room well ventilated. On both of my CO2s, an inline duct fan venting outside is what actually clears the smoke. Plan for that or Bambu's purifier before the machine arrives.

What I'd add on day one

  1. A plan for exhaust. An inline duct fan to the outside, or Bambu's purifier.
  2. CO2 laser safety glasses rated for 10,600 nm, especially if you'll run the riser or conveyor.
  3. A cleaning kit: gloves, 70% isopropyl, foam swabs, a microfiber cloth. Any CO2 needs clean optics.
  4. A test routine. Dial in your own settings on scrap before a customer's material goes in.

Should you buy one?

Buy it if

  • You cut and engrave wood, acrylic, leather and paper
  • You want automatic alignment and camera placement
  • You're short on space for a 600 x 300 mm machine
  • You already use Bambu printers and MakerWorld

Think twice if

  • Most of your items are taller than 58 mm
  • You need to mark bare metal
  • You'd rather not add the riser, lenses and encoder separately
  • LightBurn is the center of your workflow. Bambu lists Bambu Suite.

Weighing it against xTool's desktop CO2? Read xTool P2S vs Bambu Lab R1. Looking at Glowforge too? See Bambu Lab R1 vs Glowforge.

See the R1 at Bambu Lab

Common questions

How big is the Bambu Lab R1 working area?

600 x 300 mm standalone, and 600 x 3000 mm with the conveyor. It accepts material up to 710 x 380 mm standalone.

How tall an item fits in the R1?

Per Bambu, 0 to 58 mm standalone and up to 248 mm with the riser base. The riser is also required for the rotary and the conveyor.

Is the Bambu Lab R1 Class 1?

Standalone, yes. Bambu says that with the riser base or the conveyor, the enclosure is no longer complete and it becomes a Class 4 device that requires CO2 laser safety eyewear.

How thick can the R1 cut?

Per Bambu, 15 mm black walnut plywood and 20 mm acrylic with the standard short-focus lens, and 18 mm black walnut plywood with the medium or long lens.

Can the R1 engrave metal?

Coated metal, yes. Bambu says bare metal can't be engraved and warns against reflective, uncoated metals.

What does the R1 need that's sold separately?

Per Bambu: the riser base, rotary, conveyor, medium and long focus lenses, Vision Encoder, auto fire extinguishing system and E1 Pro purifier.

Have you tested the R1 yourself?

No, I don't own one. The details in this post come from Bambu Lab's published pages. My hands-on CO2 experience is with an xTool P2 and a Thunder Nova 35, and I run Bambu Lab 3D printers.

More from the Maker Guides

xTool P2S vs Bambu Lab R1

Bambu Lab R1 vs Glowforge

xTool P2: what I've learned since 2023

See my laser files

Watch my laser videos on Samcraft on YouTube.

Sam

Disclosure: I don't own a Bambu Lab R1, and no hands-on testing of it is reflected in this post. Samcraft has no relationship with Bambu Lab, and there are no affiliate links in this post. Specifications are from Bambu Lab's R1 specs, overview and FAQ pages. Last reviewed September 2026.

Back to blog