• Samcraft round ceramic ornament jig on the bed of an xTool Omni UV printer, holding four white round ceramic ornaments, seated on the Omni Jig Alignment System.
  • Front view of the Samcraft round ceramic ornament jig for the xTool Omni loaded with four white ceramic ornaments in a single row, a full run in one pass.
  • Close-up of an empty pocket in the Samcraft round ceramic ornament jig for the xTool Omni, showing the small locating nub that fits the ornament's hanging hole.
  • Angled close-up of white round ceramic ornaments seated in the Samcraft xTool Omni jig, every hanging hole in the same position.
  • Close-up of the Samcraft round ceramic ornament jig for the xTool Omni showing the finger slots between the pockets for lifting each ornament out.
  • Ornament size chart for the Samcraft round ceramic ornament jig for the xTool Omni: tested with 76.7 mm (3.02 in) round ceramic ornaments, 4.0 mm thick, with a 5.8 mm hanging hole centered 8.9 mm from the edge. Ornaments with no hanging hole, a hole in a different spot, or over 77.3 mm across won't fit.
  • Samcraft round ceramic ornament jig holding four white ceramic ornaments on the xTool Omni UV printer bed, set up for production runs.
  • Hand holding the one-piece Samcraft round ceramic ornament jig for the xTool Omni, four white ceramic ornaments seated in a single molded gray tray.
  • Angled view of the Samcraft round ceramic ornament jig with four ornaments on the xTool Omni printer bed, for repeatable print placement.
  • Close-up of the Samcraft round ceramic ornament jig seated on the Omni Jig Alignment System, the alignment system lettering visible along the edge.
  • Close-up of white ceramic ornaments in the Samcraft round ceramic ornament jig on the Omni Jig Alignment System, built for daily-use durability.
  • Samcraft xTool Omni round ceramic ornament jig filled with four white ceramic ornaments, ready for holiday ornament batch orders.
  • "Your Purchase Includes" card showing that each Samcraft xTool Omni jig purchase comes with the jig or fixture and an xTool Omni template file.
  • "Why Buy From Samcraft" card: trusted by makers, real-life UV and laser experience, educational content creator on YouTube, 100% designed and made by Sam, a Tennessee small business.
1 14

Round Ceramic Ornament Jig for xTool Omni UV Printer

Round Ceramic Ornament Jig for xTool Omni UV Printer

$29.99
$34.99 $29.99
Sale Sold out
Shipping calculated at checkout.
SAVE $10

Add the Jig Alignment System for $9.99 ā€” normally $19.99. Put it in the cart with this jig and the discount is applied automatically at checkout. No code needed!

See the Jig Alignment System ā†’

Print on round ceramic ornaments with pinpoint precision on your xTool Omni UV Printer. The Samcraft Round Ceramic Ornament Jig holds 4 ornaments at once, and a small locating nub drops into each ornament's hanging hole, so every ornament sits hole-up in exactly the same spot. Your artwork lands in the same place on all four, every run. Designed specifically for the xTool Omni UV Printer.

What's Included

  • Round Ceramic Ornament Jig (holds 4 ornaments)
  • xTool Omni alignment template files, plain and with center crosshairs
  • xTool Studio file (.xs): open it, load your ornaments, and print

Ornaments not included. Tested to fit these exact ornaments on Amazon, the ones shown in the photos. Other brands vary in size and hole position, so verify your item dimensions before ordering.

Disclosure: some links on this page are affiliate links. As an Amazon Associate, and through the xTool affiliate program, Samcraft earns from qualifying purchases at no extra cost to you.

Specs & Compatibility

  • Primary compatibility: xTool Omni UV Printer
  • Fits: Round ceramic ornaments 76.7 mm (3.02") across and 4 mm thick, with a 5.8 mm hanging hole centered 8.9 mm from the edge, like the tested ornaments linked above. The hole drops over a locating nub, so ornaments with the hole in a different spot, or over 77.3 mm across, won't fit. Verify dimensions before ordering
  • Capacity: Holds 4 ornaments at once
  • Material: Precision-made plastic
  • Origin: Made in Sam's Tennessee workshop
  • Lead Time: Average 4 business days

Product Features

  • A locating nub fits the hanging hole, so every ornament sits hole-up in the same position
  • Print 4 ornaments per pass for holiday batch runs
  • Finger slots between the pockets for an easy lift-out
  • Template outlines mark the hanging hole, so your artwork stays clear of it
  • One-piece design with nothing to shift between runs
  • Compatible with all Samcraft xTool Omni jigs for a unified workflow
  • Made to order in Tennessee for a precision fit

āš” Pair with the Samcraft xTool Omni Jig Alignment System for true drop-in placement. Every jig lands square and centered, every swap.

Proudly made in Tennessee. Average turnaround is 4 business days.
šŸŽ Have a custom idea? Message Sam about a custom jig.
šŸ” Browse all Samcraft xTool Omni jigs.

Dialing in a new material, or want to check your machine? Start with my free UV Print Test Kit: free files, and how to read what they tell you.

Also Available

Please Note: Slight color variations may occur between batches. By placing your order, you confirm you have read our Shipping Policy and Refund Policy, and understand that made-to-order items are non-refundable and cannot be exchanged or canceled.

View full details