• Samcraft round ceramic ornament jig on the bed of a eufyMake E1 UV printer, holding four white round ceramic ornaments in a row beside the bed's built-in ruler.
  • Samcraft round ceramic ornament jig for the eufyMake E1 loaded with four white ceramic ornaments, a full run in a single pass.
  • Close-up of an empty pocket in the Samcraft round ceramic ornament jig for the eufyMake E1, showing the locating nub that fits the ornament's hanging hole.
  • Close-up of a white round ceramic ornament seated hole-up in the Samcraft eufyMake E1 jig, next to the bed's built-in ruler.
  • A white ceramic ornament tilted up out of its pocket in the Samcraft eufyMake E1 jig, showing the finger slots for an easy lift-out.
  • Ornament size chart for the Samcraft round ceramic ornament jig for the eufyMake E1: tested with 76.7 mm (3.02 in) round ceramic ornaments, 4.0 mm thick, with a 5.8 mm hanging hole centered 8.9 mm from the edge. Ornaments with no hanging hole, a hole in a different spot, or over 77.3 mm across won't fit.
  • Samcraft round ceramic ornament jig holding white ceramic ornaments on the eufyMake E1 UV printer bed, set up for production runs.
  • Hand holding the one-piece Samcraft round ceramic ornament jig for the eufyMake E1, four white ceramic ornaments seated in a single molded gray tray.
  • Angled view of the Samcraft round ceramic ornament jig with four ornaments on the eufyMake E1 printer bed, for repeatable print placement.
  • Close-up of the Samcraft round ceramic ornament jig on the eufyMake E1 bed, the gray Jig Alignment System end piece fitted over the end of the bed.
  • Close-up of white ceramic ornaments in the Samcraft round ceramic ornament jig on the eufyMake E1 bed, built for daily-use durability.
  • "Your Purchase Includes" card outlining that each purchase of a Samcraft eufyMake Jig comes with the jig and template files for using the jig in the eufymake uv printer
  • Close-up of Samcraft's optional jig alignment system, two gray 3D-printed alignment pieces sitting on a eufyMake UV printer bed
  • "Why Buy From Samcraft" card: trusted by makers, real-life UV and laser experience, educational content creator on YouTube, 100% designed and made by Sam, a Tennessee small business.
1 14

Round Ceramic Ornament Jig for eufyMake E1 UV Printer

Round Ceramic Ornament Jig for eufyMake E1 UV Printer

$24.99
$29.99 $24.99
Sale Sold out
Shipping calculated at checkout.

Print on round ceramic ornaments with pinpoint precision on your eufyMake E1 UV Printer. The Samcraft Round Ceramic Ornament Jig holds 4 ornaments at once, and a small locating nub drops into each ornament's hanging hole, so every ornament sits hole-up in exactly the same spot. Your artwork lands in the same place on all four, every run. Designed specifically for the eufyMake E1 UV Printer.

What's Included

  • Round Ceramic Ornament Jig (holds 4 ornaments)
  • eufyMake alignment template files, plain and with center crosshairs (.empf project file, plus SVG and PDF)

Ornaments not included. Tested to fit these exact ornaments on Amazon, the ones shown in the photos. Other brands vary in size and hole position, so verify your item dimensions before ordering.

Disclosure: some links on this page are affiliate links. As an Amazon Associate, and through the eufyMake affiliate program, Samcraft earns from qualifying purchases at no extra cost to you.

Specs & Compatibility

  • Primary compatibility: eufyMake E1 UV Printer
  • Fits: Round ceramic ornaments 76.7 mm (3.02") across and 4 mm thick, with a 5.8 mm hanging hole centered 8.9 mm from the edge, like the tested ornaments linked above. The hole drops over a locating nub, so ornaments with the hole in a different spot, or over 77.3 mm across, won't fit. Verify dimensions before ordering
  • Capacity: Holds 4 ornaments at once
  • Material: Precision-made plastic
  • Origin: Made in Sam's Tennessee workshop
  • Lead Time: Average 4 business days

Product Features

  • A locating nub fits the hanging hole, so every ornament sits hole-up in the same position
  • Print 4 ornaments per pass for holiday batch runs
  • Finger slots between the pockets for an easy lift-out
  • Template outlines mark the hanging hole, so your artwork stays clear of it
  • One-piece design with nothing to shift between runs
  • Compatible with all Samcraft eufyMake E1 jigs for a unified workflow
  • Made to order in Tennessee for a precision fit

āš” Pair with the Samcraft eufyMake Jig Alignment System for true drop-in placement. Swap jigs instantly without re-aligning every time. Samcraft was the first to offer a complete, turn-key system for perfect jig alignment on the E1, with training included.

Proudly made in Tennessee. Average turnaround is 4 business days.
šŸŽ Have a custom idea? Message Sam about a custom jig.
šŸ” Browse all Samcraft eufyMake E1 jigs.

Prints coming out slightly off-size? Dial in your machine with my free eufyMake E1 print-scale calibration tool.

Also Available

Please Note: Slight color variations may occur between batches. By placing your order, you confirm you have read our Shipping Policy and Refund Policy, and understand that made-to-order items are non-refundable and cannot be exchanged or canceled.

View full details