• Samcraft 39mm poker chip jig on the bed of an xTool Omni UV printer, loaded with 16 white poker chips in three staggered rows, seated in the Omni Jig Alignment System.
  • Front view of the Samcraft 39mm poker chip jig on the xTool Omni bed holding 16 chips in rows of five, six and five, a full tray in one pass.
  • Angled view of the Samcraft xTool Omni 39mm poker chip jig showing three staggered rows of chips across the full width of the bed.
  • Close-up of the Samcraft 39mm poker chip jig with four pockets empty, showing the finger slot beside each pocket for lifting chips out.
  • Close-up of 39 mm poker chips seated snugly in the pockets of the Samcraft xTool Omni poker chip jig.
  • Chip size chart for the Samcraft 39mm poker chip jig for xTool Omni: made for 39 mm round poker chips 3 mm thick. 40 mm chips and square or shaped chips won't fit.
  • Samcraft 39mm poker chip jig loaded with 16 chips on the xTool Omni UV printer bed, set up for production runs.
  • Hand holding the one-piece Samcraft 39mm poker chip jig for the xTool Omni, loaded with 16 poker chips, in front of the printer.
  • Close-up of poker chips resting on the ledge of each pocket in the Samcraft 39mm jig, with open space underneath so chips with raised prints sit flat.
  • Close-up of the Samcraft 39mm poker chip jig seated in the xTool Omni Jig Alignment System end piece, with the Samcraft logo on the end piece.
  • Low angle view of the Samcraft 39mm poker chip jig loaded with chips in the Jig Alignment System, showing its solid one-piece build.
  • Samcraft 39mm poker chip jig on the xTool Omni UV printer bed holding 16 chips, ready to batch out custom poker chip sets.
  • "Your Purchase Includes" card showing that each Samcraft xTool Omni jig purchase comes with the jig or fixture and an xTool Omni template file.
  • "Why Buy From Samcraft" card: trusted by makers, real-life UV and laser experience, educational content creator on YouTube, 100% designed and made by Sam, a Tennessee small business.
1 14

Poker Chip Jig (39mm) for xTool Omni UV Printer

Poker Chip Jig (39mm) for xTool Omni UV Printer

$29.99
$34.99 $29.99
Sale Sold out
Shipping calculated at checkout.
SAVE $10

Add the Jig Alignment System for $9.99 — normally $19.99. Put it in the cart with this jig and the discount is applied automatically at checkout. No code needed!

See the Jig Alignment System →
STARTER KIT

Getting 4 or more jigs? Build an Omni Starter Kit and the Jig Alignment System and Jig Size FatMat are both half price. Applied automatically at checkout, no code needed!

Build your Omni Starter Kit →

Print custom poker chips with pinpoint precision on your xTool Omni UV Printer. The Samcraft Poker Chip Jig (39mm) holds 16 chips in three staggered rows across the full bed, so every chip drops into the same spot and your artwork lands in the same place on all sixteen, every run. Designed specifically for the xTool Omni UV Printer.

What's Included

  • Poker Chip Jig 39mm (holds 16 chips)
  • xTool Omni alignment template files, plain and with center crosshairs
  • xTool Studio files (.xs), plain and with center crosshairs: open one, load your chips, and print

Poker chips not included. Verify your chip size before ordering.

Disclosure: some links on this page are affiliate links. Through the xTool affiliate program, Samcraft earns from qualifying purchases at no extra cost to you.

Specs & Compatibility

  • Primary compatibility: xTool Omni UV Printer
  • Fits: 39 mm poker chips, tested with 39 mm (1.54") chips 3 mm thick, like the chips shown in the photos. For 40 mm chips, see our Poker Chip Jig (40mm).
  • Capacity: Holds 16 chips at once
  • Material: Precision-made plastic
  • Origin: Made in Sam's Tennessee workshop
  • Lead Time: Average 4 business days

Product Features

  • Three staggered rows hold 16 chips per pass
  • Pockets sized for 39 mm poker chips, for a snug drop-in fit
  • Relief print ready: each chip rests on a ledge over a deeper pocket, so a chip with raised print on one side still sits flat while you print the other
  • A finger slot beside every chip, so each one lifts straight out without prying
  • One-piece design with nothing to shift between runs
  • Eliminates alignment guesswork for consistent, professional results every time
  • Compatible with all Samcraft xTool Omni jigs for a unified workflow
  • Made to order in Tennessee for a precision fit

⚡ Pair with the Samcraft xTool Omni Jig Alignment System for true drop-in placement. Every jig lands square and centered, every swap.

Proudly made in Tennessee. Average turnaround is 4 business days.
🎁 Have a custom idea? Message Sam about a custom jig.
🔍 Browse all Samcraft xTool Omni jigs.

Dialing in a new material, or want to check your machine? Start with my free UV Print Test Kit: free files, and how to read what they tell you.

Also Available

Please Note: Slight color variations may occur between batches. By placing your order, you confirm you have read our Shipping Policy and Refund Policy, and understand that made-to-order items are non-refundable and cannot be exchanged or canceled.

View full details