• Samcraft paper business card jig on the bed of an xTool Omni UV printer, holding six white 3.5 x 2 inch business cards in two rows of three.
  • Front view of the Samcraft paper business card jig for the xTool Omni holding six blank business cards, a full tray in one pass.
  • Angled view of the Samcraft xTool Omni paper business card jig showing two rows of three cards across the full width of the bed.
  • Close-up of the Samcraft xTool Omni paper business card jig with two pockets empty, showing the finger slots between the pockets for lifting cards out.
  • Close-up of 3.5 x 2 inch business cards sitting flush in their pockets in the Samcraft xTool Omni jig, next to the Omni Jig Alignment System end piece.
  • Card size chart for the Samcraft paper business card jig for the xTool Omni: tested with Avery 5874 business cards, 3.5 x 2 inch (88.9 x 50.8 mm) with square corners. Rounded-corner cards of the same size also fit. Credit card size (85.6 x 54 mm) and UK/European (85 x 55 mm) cards won't fit.
  • Samcraft paper business card jig loaded with six cards on the xTool Omni UV printer bed, set up for production runs.
  • Hand holding the one-piece Samcraft paper business card jig for the xTool Omni, loaded with six business cards, in front of the printer bed.
  • Angled view of six white business cards lined up in matching pockets of the Samcraft xTool Omni jig, every card in the same position.
  • Close-up of the Samcraft paper business card jig seated in the xTool Omni Jig Alignment System end piece, with the Samcraft logo visible on the end piece.
  • Samcraft xTool Omni paper business card jig loaded with cards, shown at an angle to highlight its solid one-piece build.
  • Samcraft paper business card jig on the xTool Omni UV printer bed holding six cards, ready to batch out business card orders.
  • "Your Purchase Includes" card showing that each Samcraft xTool Omni jig purchase comes with the jig or fixture and an xTool Omni template file.
  • "Why Buy From Samcraft" card: trusted by makers, real-life UV and laser experience, educational content creator on YouTube, 100% designed and made by Sam, a Tennessee small business.
1 14

Paper Business Card Jig for xTool Omni UV Printer

Paper Business Card Jig for xTool Omni UV Printer

$29.99
$34.99 $29.99
Sale Sold out
Shipping calculated at checkout.
SAVE $10

Add the Jig Alignment System for $9.99 ā€” normally $19.99. Put it in the cart with this jig and the discount is applied automatically at checkout. No code needed!

See the Jig Alignment System ā†’

Print on standard paper business cards with pinpoint precision on your xTool Omni UV Printer. The Samcraft Paper Business Card Jig holds 6 standard 3.5" x 2" cards in two rows of three, so every card drops into the same spot and your artwork lands in the same place on all six, every run. Designed specifically for the xTool Omni UV Printer.

What's Included

  • Paper Business Card Jig (holds 6 cards)
  • xTool Omni alignment template files, plain and with center crosshairs
  • xTool Studio files (.xs), plain and with crosshairs: open one, load your cards, and print

Business cards not included. Verify your item dimensions before ordering. Printing metal business cards, ID badges or other 3.375" x 2.125" (CR80) blanks? Those need the Business Card, ID Badge & Card Bottle Opener Jig instead.

Disclosure: some links on this page are affiliate links. Through the xTool affiliate program, Samcraft earns from qualifying purchases at no extra cost to you.

Specs & Compatibility

  • Primary compatibility: xTool Omni UV Printer
  • Fits: Standard US and Canada paper business cards, 3.5" x 2" (88.9 x 50.8 mm), square or rounded corners. Not sized for European (85 x 55 mm) or other regional card sizes. Verify dimensions before ordering
  • Capacity: Holds 6 cards at once, two rows of three
  • Material: Precision-made plastic
  • Origin: Made in Sam's Tennessee workshop
  • Lead Time: Average 4 business days

Product Features

  • Two rows of three hold 6 cards per pass
  • Pockets sized for standard US paper business cards, for a snug drop-in fit
  • Shallow pockets made for paper card stock
  • Finger slots between the pockets for an easy lift-out
  • One-piece design with nothing to shift between runs
  • Eliminates alignment guesswork for consistent, professional results every time
  • Compatible with all Samcraft xTool Omni jigs for a unified workflow
  • Made to order in Tennessee for a precision fit

āš” Pair with the Samcraft xTool Omni Jig Alignment System for true drop-in placement. Every jig lands square and centered, every swap.

Proudly made in Tennessee. Average turnaround is 4 business days.
šŸŽ Have a custom idea? Message Sam about a custom jig.
šŸ” Browse all Samcraft xTool Omni jigs.

Dialing in a new material, or want to check your machine? Start with my free UV Print Test Kit: free files, and how to read what they tell you.

Also Available

Please Note: Slight color variations may occur between batches. By placing your order, you confirm you have read our Shipping Policy and Refund Policy, and understand that made-to-order items are non-refundable and cannot be exchanged or canceled.

View full details