• Samcraft paper business card jig on the bed of a eufyMake E1 UV printer, holding three white 3.5 x 2 inch business cards in a row.
  • Front view of the Samcraft paper business card jig for the eufyMake E1 holding three blank business cards, a full tray in one pass.
  • Angled view of the Samcraft eufyMake E1 paper business card jig showing three cards in a single row along the length of the print bed.
  • Close-up of the Samcraft eufyMake E1 paper business card jig with the center pocket empty, showing the finger slots on each side for lifting cards out.
  • Close-up of a white 3.5 x 2 inch business card sitting flush in its pocket in the Samcraft eufyMake E1 jig.
  • Card size chart for the Samcraft paper business card jig for the eufyMake E1: tested with Avery 5874 business cards, 3.5 x 2 inch (88.9 x 50.8 mm) with square corners. Rounded-corner cards of the same size also fit. Credit card size (85.6 x 54 mm) and UK/European (85 x 55 mm) cards won't fit.
  • Samcraft paper business card jig loaded with three cards on the eufyMake E1 UV printer bed, set up for production runs.
  • Hand holding the one-piece Samcraft paper business card jig for the eufyMake E1, loaded with three business cards, in front of the printer bed.
  • Angled view of three white business cards lined up in matching pockets of the Samcraft eufyMake E1 jig, every card in the same position.
  • Close-up of the Samcraft paper business card jig seated against the eufyMake E1 Jig Alignment System end piece, with its QR code label visible.
  • Samcraft eufyMake E1 paper business card jig loaded with cards, shown at an angle to highlight its solid one-piece build.
  • Close-up of business cards loaded in the Samcraft paper business card jig on the eufyMake E1, ready to batch out business card orders.
  • "Your Purchase Includes" card outlining that each purchase of a Samcraft eufyMake Jig comes with the jig and template files for using the jig in the eufymake uv printer
  • Close-up of Samcraft's optional jig alignment system, two gray 3D-printed alignment pieces sitting on a eufyMake UV printer bed
  • "Why Buy From Samcraft" card: trusted by makers, real-life UV and laser experience, educational content creator on YouTube, 100% designed and made by Sam, a Tennessee small business.
1 15

Paper Business Card Jig for eufyMake E1 UV Printer

Paper Business Card Jig for eufyMake E1 UV Printer

$24.99
$29.99 $24.99
Sale Sold out
Shipping calculated at checkout.

Print on standard paper business cards with pinpoint precision on your eufyMake E1 UV Printer. The Samcraft Paper Business Card Jig holds 3 standard 3.5" x 2" cards in a row, so every card drops into the same spot and your artwork lands in the same place on all three, every run. Designed specifically for the eufyMake E1 UV Printer.

What's Included

  • Paper Business Card Jig (holds 3 cards)
  • eufyMake alignment template files, plain and with center crosshairs (.empf project file, plus SVG and PDF)

Business cards not included. Verify your item dimensions before ordering. Printing metal business cards, ID badges or other 3.375" x 2.125" (CR80) blanks? Those need the Business Card Jig instead.

Disclosure: some links on this page are affiliate links. Through the eufyMake affiliate program, Samcraft earns from qualifying purchases at no extra cost to you.

Specs & Compatibility

  • Primary compatibility: eufyMake E1 UV Printer
  • Fits: Standard US and Canada paper business cards, 3.5" x 2" (88.9 x 50.8 mm), square or rounded corners. Not sized for European (85 x 55 mm) or other regional card sizes. Verify dimensions before ordering
  • Capacity: Holds 3 cards at once
  • Material: Precision-made plastic
  • Origin: Made in Sam's Tennessee workshop
  • Lead Time: Average 4 business days

Product Features

  • Three cards in a row per pass
  • Pockets sized for standard US paper business cards, for a snug drop-in fit
  • Shallow pockets made for paper card stock
  • Finger slots between the pockets for an easy lift-out
  • One-piece design with nothing to shift between runs
  • Eliminates alignment guesswork for consistent, professional results every time
  • Compatible with all Samcraft eufyMake E1 jigs for a unified workflow
  • Made to order in Tennessee for a precision fit

āš” Pair with the Samcraft eufyMake Jig Alignment System for true drop-in placement. Swap jigs instantly without re-aligning every time. Samcraft was the first to offer a complete, turn-key system for perfect jig alignment on the E1, with training included.

Proudly made in Tennessee. Average turnaround is 4 business days.
šŸŽ Have a custom idea? Message Sam about a custom jig.
šŸ” Browse all Samcraft eufyMake E1 jigs.

Prints coming out slightly off-size? Dial in your machine with my free eufyMake E1 print-scale calibration tool.

Also Available

Please Note: Slight color variations may occur between batches. By placing your order, you confirm you have read our Shipping Policy and Refund Policy, and understand that made-to-order items are non-refundable and cannot be exchanged or canceled.

View full details