eufyMake E1 vs xTool O1 Omni: Honest UV Printer Head-to-Head

Where I stand, so you can judge for yourself: I'm a partner and affiliate of both companies in this comparison: xTool provided my O1 Omni, and eufyMake provided my E1 back in 2025 — each in exchange for content on my channel, and neither has ever had a say in what I tell you. Links to either brand may be affiliate links. Beyond that, I design and sell Samcraft accessories for both machines, including a free calibration tool for the E1. My business does better when you buy the right machine for YOUR shop, whichever one that is. That's the spirit of this comparison.

If you're shopping for a desktop UV printer right now, you've almost certainly narrowed it to these two: the eufyMake E1 — the machine that created the personal 3D-texture UV printer category — and the xTool O1 Omni — the 4-in-1 challenger built to cover hard goods and apparel.

Here's the short answer, then the full breakdown:

• They're closer than the marketing suggests: identical maximum print area (330 × 420 mm), both do UV printing and UV DTF decals, and both print tumblers directly with a rotary attachment.
• The E1 is the proven, field-tested pick with a massive user base, a mature accessory ecosystem, and GREENGUARD Gold-certified ink.
• The O1 Omni goes deeper on texture (7 mm vs 5 mm), is the only one of the two that can truly print apparel (Fabric edition only), and is the only one that talks to a laser.
• The single biggest decision trap sits on the xTool side: the O1 comes in three non-interchangeable editions, and you can't add apparel capability after purchase.

What They Have in Common (More Than You'd Think)

Strip away the marketing and these two machines share the same foundation. Both are desktop UV flatbed printers with a 330 × 420 mm (A3+) maximum print area — genuinely identical, down to the millimeter. Both print directly onto rigid materials: acrylic, wood, metal, glass, ceramic, and more. Both produce UV DTF transfer decals for curved and irregular objects.

Both offer a rotary attachment that prints directly onto tumblers, mugs, and other cylinders. Both build raised, tactile 3D textures with gloss/varnish effects. And both use proprietary cartridge ink systems with automated anti-clog maintenance — JetClean on the E1, Smart Cycle 2.0 on the O1.

So if your entire plan is "print flat hard goods and the occasional tumbler," honestly? Either machine does the job. The differences that should actually drive your decision live in five specific places.

The Five Differences That Actually Matter

1. Apparel: the E1 can't, and only one O1 edition can

This is the biggest structural difference between the two platforms. The E1 is not an apparel printer — it can lay UV ink onto fabric surfaces like canvas for décor work (using its flexible white ink), but UV ink on a t-shirt is not a soft, washable garment print. There's no DTG and no garment DTF workflow.

The O1 Omni can genuinely print apparel — DTG directly onto cotton, and DTF transfers for polyester, blends, and nylon — but only in its UV + DT Fabric edition. The O1's two UV-only editions are just as apparel-locked as the E1, and there's no upgrade path later. I wrote a full guide to the O1's three editions and that no-upgrade trap: xTool O1 Omni: Every Model Compared.

So the apparel question isn't really "E1 vs O1." It's "E1 vs one specific edition of the O1" — and if shirts are in your future, that edition is the only door on this entire page.

2. Texture depth: 5 mm vs 7 mm

Both machines emboss beautifully — raised brushstrokes, faux leather grain, wood texture, tactile art that makes people pick the piece up. The E1's Amass3D technology builds textures up to 5 mm; the O1 pushes to 7 mm. For most product work (textured signs, embossed card effects, raised logos), 5 mm is plenty and you'd never miss the difference. Where the extra 2 mm matters is deep-relief art pieces and dramatic dimensional effects — if "how far off the surface can I build?" is your selling point, the O1 has the taller ceiling. Fair warning that applies to both machines: deep texture drinks white ink, so texture-heavy shops should pay close attention to ink economics (more on that below).

3. Specialty inks: each has an exclusive

Here's a row people get wrong in both directions. Flexible white ink — the ink that lets prints survive on materials that bend, like leather and canvas — is standard equipment on the E1, but on the O1 it's exclusive to the Dual-Head UV edition. Point to the E1.

Fluorescent ink — colors that genuinely glow under UV light — exists on neither the E1 nor most O1s; it's exclusive to the O1's Dual-Head UV edition (red and yellow only). If neon effects are your brand, exactly one machine configuration on the market does it, and it's that one.

4. Ecosystem: templates vs laser integration

The E1's ecosystem strength is software breadth: a library of 20,000+ ready-to-print templates, AI design tools, and the accumulated project knowledge of the largest user community in this category. If you want to go from zero to sellable product with minimal design work, that ecosystem is real value.

The O1's ecosystem strength is hardware integration: it shares xTool Studio software with xTool's laser lineup, so you can print the color on the O1 and cut the outline on your laser in one workflow — no exporting, no realignment. If you already run an xTool laser (F1, F2, P-series), this is a genuinely different way of working, and it's the O1's most underrated advantage. If you don't own an xTool laser, this row is worth nothing to you.

5. Track record: shipping-and-proven vs newest-and-boldest

Straight talk: the E1 has been in thousands of real workshops, its quirks are documented, its accessory line is mature, and its ink carries GREENGUARD Gold certification for low chemical emissions — a meaningful point if you print in your home. The O1 is the newer platform with the stronger spec sheet: deeper texture, the apparel option, published ±0.2 mm Pixel-Scan positioning, and Vacation Mode that protects the printhead through two weeks of downtime. Newer also means a shorter field history. Neither of those is a criticism — it's a genuine temperament question: do you want the machine whose failure modes the community has already mapped, or the machine with the higher ceiling?

The Four-Question Shortcut

If you only remember four things from this post:

• Will you ever print apparel? Then it's the O1 Omni's UV + DT Fabric edition, full stop — nothing else on this page prints shirts.
• Is deep 3D texture your product? Both emboss; the O1 builds 2 mm taller.
• Do you already run an xTool laser? The O1's print-and-cut workflow is an advantage the E1 structurally can't match.
• Do you want the proven pick? The E1 created this category, and its track record, community, and accessory maturity are the strongest in the space.

What About Price and Ink Cost?

I keep pricing out of my guides on purpose — promotions, bundles, and ink prices change monthly, and a stale number is worse than no number. Check both manufacturers directly: current xTool O1 Omni pricing here (affiliate link) and eufyMake's site for current E1 pricing.

But here's the evergreen advice: when you compare, look past the machine price to the per-milliliter ink cost — and multiply it by your product plan. Texture printing and white-ink-heavy work consume serious ink, and over a couple of years of production the ink gap between two machines can dwarf the sticker gap. Both companies run proprietary ink systems, so the price you see is the price you'll live with. Do that math for your products before either sticker price sways you.

FAQ: E1 vs O1 Omni Quick Answers

Can the eufyMake E1 print t-shirts?

Not as a true apparel printer. The E1 can apply UV ink to fabric surfaces like canvas for décor purposes using flexible white ink, but it has no DTG or garment DTF workflow, so it can't produce soft, washable apparel prints. Of these two platforms, only the xTool O1 Omni's UV + DT Fabric edition prints apparel.

Do the E1 and O1 Omni have the same print area?

Yes — both max out at 330 × 420 mm (A3+), identical to the millimeter.

Which prints deeper 3D texture, the E1 or the O1 Omni?

The xTool O1 Omni builds raised texture up to 7 mm; the eufyMake E1 builds up to 5 mm. Both produce tactile embossed effects; the O1 has the taller ceiling for deep-relief work.

Can both machines print on tumblers?

Yes. Both offer rotary attachments that print directly onto cylinders — tumblers, mugs, bottles — and both can also produce UV DTF transfer decals as an alternative for curved objects.

Which machine has fluorescent or glow inks?

Only the xTool O1 Omni's Dual-Head UV edition runs fluorescent inks (red and yellow) that glow under UV light. The E1 and the other O1 editions don't offer them.

Does the eufyMake E1 have flexible white ink?

Yes — flexible white ink for bendable materials like leather and canvas is part of the E1's standard capability set. On the xTool O1 Omni, flexible white ink is exclusive to the Dual-Head UV edition.

Which is better if I already own an xTool laser?

The O1 Omni — it shares xTool Studio software with xTool lasers, enabling a print-then-cut workflow in one program: the O1 prints the color, the laser cuts the outline. The E1 has no equivalent laser integration.

Are the inks safe for home workshops?

Both companies address this directly: eufyMake's E1 ink carries GREENGUARD Gold certification for low chemical emissions, and xTool formulates the O1's ink to be non-reprotoxic. As with any UV printer, proper ventilation is still recommended for both.

My Bottom Line

These are both good machines, and that's exactly why the decision deserves precision. Buy the eufyMake E1 if you're a hard-goods maker who values a proven platform, the biggest community, flexible white ink as standard, and a template ecosystem that shortcuts design work. Buy the xTool O1 Omni if apparel is anywhere in your plans (Fabric edition — and only that edition), if deep 3D texture or fluorescent effects are your product, or if you already run an xTool laser and want print-and-cut in one workflow. And whichever way you lean on the O1, read my edition guide before you order — the edition choice is permanent.

I Build for Both — Here's What That Gets You

This comparison isn't theoretical for me. Samcraft designs and sells precision accessories for both platforms: browse the eufyMake E1 collection — including a free E1 print-scale calibration tool you can grab right now — and with my O1 Omni arriving in the shop, purpose-built Omni jigs and fixtures are next on my bench. Whichever machine you choose, the physics don't change: repeatable placement is what turns a good printer into a production tool.

• Grab the free eufyMake E1 calibration tool,
• Browse the full Samcraft jig and fixture lineup,
• Subscribe to Samcraft on YouTube for the hands-on testing series,
• And join the email list below to know when Omni accessories drop.

Torn between the two for your specific product line? Tell me what you make in the comments — matching machines to shops is genuinely my favorite part of this.

— Sam

Disclosure: Samcraft is a content partner and affiliate of both xTool and eufyMake. xTool provided the O1 Omni printer and eufyMake provided the E1 printer, each in exchange for video content, and links to either company in this post may be affiliate links that earn Samcraft a commission at no additional cost to you. Neither company has any editorial input or control over Samcraft content. Samcraft also sells its own independently designed accessories for both machines. All opinions are my own. Capabilities and specifications verified against each manufacturer's published documentation; last reviewed July 2026.